EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: Extensions installation for newbie
From: Ralph Lange <[email protected]>
To: Michal Vítek <[email protected]>
Cc: EPICS Tech-Talk <[email protected]>
Date: Thu, 10 Jan 2013 12:32:01 +0100
Hi Mike,

you seem to be using an EPICS 3.13 extension tree, trying to compile against a 3.14 base.
Please start with an extension configuration that matches you base version.
The EPICS Extension page [1] has tars for both.

Good luck!
~Ralph

[1] http://www.aps.anl.gov/epics/extensions/index.php



On 10.01.2013 12:25, Michal Vítek wrote:

Hello,

 

I am new to epics and Linux and I am trying to install the Epics base with some extensions (MEDM, asynDriver, and stripTool). The base installation went fine, but now  I am having a problem during „make“ of the extensions. I think it is related to the files that needs to be modified, so far I have changed 2 (make file in the extensions top directory and RELEASE file of the extensions). Could somebody tell me what am I doing wrong ?

 

Cheers, Mike

 

OS: Scientific Linux 6

 

Extensions Make file:
TOP = /opt/epics/extensions
include $(TOP)/configure/CONFIG
DIRS = $(wildcard configure src)
include $(TOP)/configure/RULES_TOP

Extensions Release file:

EPICS_BASE=/opt/epics/base
EPICS_EXTENSIONS=/opt/epics/extensions

Log from make:
make -C ./configure install
make[1]: Entering directory `/opt/epics/extensions/configure'
make -C O.linux-x86_64 -f ../Makefile TOP=/opt/epics/extensions/.. T_A=linux-x86_64 install
make[2]: Entering directory `/opt/epics/extensions/configure/O.linux-x86_64'
../Makefile:5: /opt/epics/extensions/../configure/CONFIG: No such file or directory
../Makefile:9: /opt/epics/extensions/../configure/RULES: No such file or directory
make[2]: *** No rule to make target `/opt/epics/extensions/../configure/RULES'.  Stop.
make[2]: Leaving directory `/opt/epics/extensions/configure/O.linux-x86_64'
make[1]: *** [install.linux-x86_64] Error 2
make[1]: Leaving directory `/opt/epics/extensions/configure'
make: *** [configure.install] Error 2



Replies:
Re: Extensions installation for newbie Ralph Lange
References:
Extensions installation for newbie Michal Vítek

Navigate by Date:
Prev: Extensions installation for newbie Michal Vítek
Next: Re: routing Ralph Lange
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Extensions installation for newbie Michal Vítek
Next: Re: Extensions installation for newbie Ralph Lange
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 20 Apr 2015 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·