g+
g+ Communities
Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014 
<== Date ==> <== Thread ==>

Subject: acalcOut
From: Pavel Maslov <pavel.masloff@gmail.com>
To: EPICS Tech Talk <tech-talk@aps.anl.gov>
Date: Thu, 10 Jan 2013 11:05:12 +0400
Hello,

I am experiencing some difficulties with this record type. 

record(acalcout, "$(P)$(R)WF1") {
  field(NELM, "2500")
  field(INPA, "$(P)$(R)setY1:RBV")
  field(INPB, "$(P)$(R)ch1pos:RBV")
  field(INCC, "$(P)$(R)wf1")
  field(CALC, "AA:=CC*5/128*A-B;AA")
}

I would like to plot an array in CSS 3.1.4. So I'm using an XY graph widget with the Y PV parameter pointed to $(P)$(R)WF1.AVAL.
However it does not put a monitor on the AVAL field. So the plot is not being updated every time the calculation is made.

Any suggestions will be much appreciated.

--
Best regards,


Pavel Maslov, MS
Controls Engineer at Pulsed power Lab
Efremov Institute for Electro-Physical Apparatus
St. Petersburg, Russia

Mobile: +7 (951) 672 22 19
Landline: +7 (812) 461 01 01

Replies:
RE: acalcOut Hu, Yong

Navigate by Date:
Prev: Re: medm build Kate Feng
Next: routing Pavel Maslov
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014 
Navigate by Thread:
Prev: Re: medm build Jeong Han Lee
Next: RE: acalcOut Hu, Yong
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  <20132014 
ANJ, 31 Jan 2014 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICSv4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·