1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Tektronix 3014 Tracing Problem |
From: | Trevor Downer <[email protected]> |
To: | [email protected] |
Cc: | Yoojong Kim <[email protected]> |
Date: | Thu, 6 Dec 2012 17:00:11 -0700 |
Greetings and salutations! I am a student at Idaho State University working on a project to control a Tektronix 3014 oscilloscope, using EPICS, for the Idaho Accelerator Center. We have successfully installed EPICS and the necessary extensions to communicate with the TDS3014 oscilloscope. Using medm we cannot see the waveform tracings, we can however see the tracings from a web browser, however its refresh rate is quite slow. There seems to be a problem when I click on the SDDS Plot button, medm outputs a message in the terminal reading: "medm/trace10k: line 8: [: T: integer expression expected Usage: trace [1-4][HV or LL]<CR>\n" Attached is a screen shot of the traceless oscilloscope in medm and the trace10k file where there seems to be a problem. I would greatly appreciate any help to fixing the tracing problem, thank you very much! -Trevor Downer
Attachment:
Tds3000 without a trace.png
Description: PNG image
Attachment:
Trace Issue.png
Description: PNG image
Attachment:
Trace10k.png
Description: PNG image