Dear all
We have a question about implementing device support for an ADC that returns values in a waveform record, not using asyn.
If we want the data to be converted from the ADC voltage range into user's engineering data, we need engineering limits or scaling factors or...
Seems that waveform is not as detailed as ai for that.
I guess that we are not the only one in the globe having this issue.
I'll appreciate to have some indication on the implementation.
Thanks!
Franck
Franck Di Maio
ITER Organization, Building 72/279, CHD, Control System Division
Route de Vinon sur Verdon - 13115 St Paul Lez Durance - France
Phone: +33 4 42 17 64 05
- Replies:
- RE: Converting raw to eng in a waveform Szalata, Zenon M.
- Re: Converting raw to eng in a waveform Tim Mooney
- Re: Converting raw to eng in a waveform Paul Sichta
- RE: Converting raw to eng in a waveform Hill, Jeff
- Re: Converting raw to eng in a waveform Maren Purves
- Navigate by Date:
- Prev:
RE: EPICS driver for E-517 Tonia Batten
- Next:
RE: Converting raw to eng in a waveform Szalata, Zenon M.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
asynPortDriver for "generic" devices tom.cobb
- Next:
RE: Converting raw to eng in a waveform Szalata, Zenon M.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|