Experimental Physics and
Industrial Control System

Rod Nussbaumer <[email protected]> · Wed, 24 Oct 2012 06:05:53 -0700

Tony:

It looks like the power supply echoes the commands that are sent to it.

You will need to craft your protocol(s) to read these echoed commands,

or there may be a way to turn off the echoes.

Rod Nussbaumer
ISAC Controls, TRIUMF
Vancouver, Canada

On 10/23/2012 05:17 PM, Anthony Andrews wrote:

###########################################################################
## Start any sequence programs
#seq sncxxx,"user=tonyHost"
epics> 2012/10/23 18:05:13.924 xxx.yyy.zzz.aaa:4008 write 3
MC\n
2012/10/23 18:05:13.936 xxx.yyy.zzz.aaa:4008 read 5
MC\n\r\000
2012/10/23 18:05:13.936 P8 LamEMS:ADDR:CURR_M: Input "MC" mismatch after
0 bytes
2012/10/23 18:05:13.936 P8 LamEMS:ADDR:CURR_M: got "MC" where "Current =
" was expected
2012/10/23 18:05:13.936 xxx.yyy.zzz.aaa:4008 write 3
MV\n

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System