Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017 
<== Date ==> <== Thread ==>

Subject: ISA 5.1. CAD tool
From: Jeřábek Jiří <Jiri.Jerabek@eli-beams.eu>
To: "tech-talk@aps.anl.gov" <tech-talk@aps.anl.gov>
Date: Thu, 18 Oct 2012 06:12:49 +0000

 

Folks,

 

Can anybody  recommend  a proven(!)  CAD software supporting

the  “ISA 5.1 INSTRUMENTATION SYMBOLS AND IDENTIFICATION ” standard ?

 

More generally,  any  advice, experience  concerning using  software design tools

for   projecting and/or documenting  a large distributed  control system is highly appreciated.

I mean  e.g.  list of tools,  their relevancy for partial tasks, ease of use , supplier,  etc.

 

If somebody is familiar with  an UML software  used to capture and document control system  requirements, algos, etc. ,

I would like to discuss the matter separately from the written above. 

 

Thanks for any  suggestion,

 

Jiri

 

Jiří Jeřábek

ELI Czech Republic

 

m: +420 702 004 857

e: jiri.jerabek@eli-beams.eu

w: www.eli-beams.eu

 

 

 


Navigate by Date:
Prev: Re: gpu integration into epics Rodrigo Castro
Next: CSS widget patard
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017 
Navigate by Thread:
Prev: RE: burtrb failing on local LAN, but not through gateway Hill, Jeff
Next: CSS widget patard
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017 
ANJ, 18 Nov 2013 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·