Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017 
<== Date ==> <== Thread ==>

Subject: Immediately reprocess a record [SEC=UNCLASSIFIED]
From: "LYNCH, Damien" <dly@ansto.gov.au>
To: "tech-talk@aps.anl.gov" <tech-talk@aps.anl.gov>
Date: Tue, 16 Oct 2012 22:19:13 +0000
Hi,

I have a record (running in a 3.14.12.2 IOC) that I would like to process as quickly as it can. This record is retrieving a waveform over a LAN from a DSO and takes a variable amount of time to process (mostly 15 - 35 ms but periodically around 150 ms).

Currently I am using a sequence program that does a pvPut(wfRecProcField, SYNC) in a hard loop to achieve this. Is this the best method? Could I have done this using the database only?

Thanks,
Damien


Replies:
Re: Immediately reprocess a record [SEC=UNCLASSIFIED] Andrew Johnson
Re: Immediately reprocess a record [SEC=UNCLASSIFIED] Tim Mooney

Navigate by Date:
Prev: Re: gpu integration into epics Rodrigo Castro
Next: Re: Immediately reprocess a record [SEC=UNCLASSIFIED] Andrew Johnson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017 
Navigate by Thread:
Prev: Re: Calcout using CA output link sometimes gets INVALID severity Andrew Johnson
Next: Re: Immediately reprocess a record [SEC=UNCLASSIFIED] Andrew Johnson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017 
ANJ, 18 Nov 2013 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·