Experimental Physics and Industrial Control System

Folks,
There is a time here to think about  tagnames (names of entities ) for the ELI 
control system.
Technological  subparts are roughly:  cryo, vacuum, laser beam distribution,  
etc.
I have a long time industrial experience  with a commercial  DCS and SCADA 
system but I am a novice with  EPICS.
Could anyone from the  community  discuss with me the EPICS approach and its 
syntactical rules?
Is the matter  completely described  within records  description, or  are  
there other points where to be careful?
It will be surely an iteration so as a starting point I would appreciate an  
EPICS web link to the relevant document.
Maybe somebody has implemented system tagnames. His  advices (or a related 
document)   could be of the  most value.

Thank you for help,

Jiri



Jirií Jerabek
SCADA Specialist
ELI Czech Republic


m: +420 702 004 857
e: [email protected]<mailto:[email protected]>
w: www.eli-beams.eu<http://www.eli-beams.eu/>

Institute of Physics
Na Slovance 1999/2
182 21  Praha 8 - Libeň

Czech Republic

Navigate by Date:

Prev: Ion Pump/controller recommendation John William Sinclair

Next: Fwd: Tagnames Paul Sichta

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <2012>  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Ion Pump/controller recommendation John William Sinclair

Next: Fwd: Tagnames Paul Sichta

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <2012>  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024