Hi Dave,
Are you using a terminal server? Sometimes they buffer things, so perhaps that is why it is coming in bursts?
Mark
________________________________
From: [email protected] [[email protected]] on behalf of David Reid [[email protected]]
Sent: Wednesday, September 26, 2012 6:59 PM
To: [email protected]
Subject: MKS937B Vacuum Gauge Controllers....
Does anyone out there have any experience with MKS937B vacuum gauge controllers? We have a couple that we have put into Emulation mode, and are communicating with using the MKS937A device support. We are seeing the driver sending out a series of Write commands, with no response, and getting a flood of responses from the controller, and the device support is unable to handle that.
Thanks...
Dave Reid
Australian Synchrotron
- References:
- MKS937B Vacuum Gauge Controllers.... David Reid
- Navigate by Date:
- Prev:
Microsoft managed code CLI C++ and EPICS Mark Clift
- Next:
Re: MKS937B Vacuum Gauge Controllers.... Boyes, Matthew
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
MKS937B Vacuum Gauge Controllers.... David Reid
- Next:
Re: MKS937B Vacuum Gauge Controllers.... Boyes, Matthew
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|