Experimental Physics and Industrial Control System
Hi Pierrick,
On 2012-09-12 Pierrick Hanlet wrote:
> I have a new machine with a new SLF 6.2 installation on a 64-bit
> machine. I have the
> same "Font init failed - abort" message as previously mentioned here. I
> found message
> 00357 as a possible solution, but alas, I have no /etc/X11/xorg.conf file.
I assume you mean this particular message 00357 from 2008:
http://www.aps.anl.gov/epics/tech-talk/2008/msg00357.php
> Is there a new solution to this problem?
Does the 'xset fp+' solution shown on that page temporarily solve the problem
i.e. if you manually add each of the paths containing the fonts you need, not
necessarily using the path shown with the xset command in the above message?
We know that the fonts needed for MEDM are not installed in Ubuntu by defalt
any more, you may have a similar issue.
- Andrew
--
Never interrupt your enemy when he is making a mistake.
-- Napoleon Bonaparte
- References:
- font init failed Pierrick Hanlet
- Navigate by Date:
- Prev:
font init failed Pierrick Hanlet
- Next:
access record info from asyn Hinko Kocevar
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
font init failed Pierrick Hanlet
- Next:
access record info from asyn Hinko Kocevar
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024