g+
g+ Communities
Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014 
<== Date ==> <== Thread ==>

Subject: Matlab choices
From: "S. Stein" <stein@aps.anl.gov>
To: tech-talk@aps.anl.gov
Date: Wed, 1 Aug 2012 07:13:01 -0500 (CDT)
Greetings all,

  I am wading into Matlab territory per request of a (non-controls) colleague. I am not at all familiar with Matlab, and he is not at all familiar with EPICS. This should be interesting.

  So right off the bat I notice there are two different 'flavors' of channel access support for Matlab; either MCA or LabCA. It isn't clear to me how to choose one over the other, so I am looking for advice from the community.

  To complicate matters, my colleague is running on Windows and likely does not currently have any compiler or make tools. 

Thoughts?

--Josh

Navigate by Date:
Prev: Re: Problem with the basic example Benjamin Franksen
Next: Re: stream device string/hex parsing Gerrit Kühn
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014 
Navigate by Thread:
Prev: Re: EPICS Base version 3.15.0.1 released Dirk Zimoch
Next: Camac TMA 3112 documentation? Mike Westfall
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014 
ANJ, 18 Nov 2013 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICSv4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·