Josh,
I don't know, but it's weird that you have
-ID:/epics/synApps_5_6/support/seq-2-1-3/dbd
and not any of the others. The only way I can get that result is by commenting out all the other modules in configure/RELEASE.
Tim
----- Original Message -----
From: "S. Stein" <[email protected]>
To: [email protected]
Sent: Wednesday, June 20, 2012 10:20:12 AM
Subject: dbd expand errors for measurementComputing module
Mark, et-al:
I am attempting to build the Measurement Computing support on a windows box with Visual Studio 10. I have successfully built base (3.14.12.2) and synApps (5.6).
During the build for measCompR1-0, the following errors cause failure during the dbExpand portion:
D:\epics\measCompR1-0>make
make: Entering directory `D:/epics/measCompR1-0'
make -C ./configure install
make[1]: Entering directory `D:/epics/measCompR1-0/configure'
make -C O.win32-x86 -f ../Makefile TOP=../.. T_A=win32-x86 install
make[2]: Entering directory `D:/epics/measCompR1-0/configure/O.win32-x86'
perl D:/base/bin/win32-x86/convertRelease.pl checkRelease
make[2]: Leaving directory `D:/epics/measCompR1-0/configure/O.win32-x86'
make[1]: Leaving directory `D:/epics/measCompR1-0/configure'
make -C ./measCompApp install
make[1]: Entering directory `D:/epics/measCompR1-0/measCompApp'
make -C ./src install
make[2]: Entering directory `D:/epics/measCompR1-0/measCompApp/src'
perl D:/base/bin/win32-x86/makeMakefile.pl O.win32-x86 ../../..
perl -MExtUtils::Command -e mkpath O.Common
make -C O.win32-x86 -f ../Makefile TOP=../../.. T_A=win32-x86 install
make[3]: Entering directory `D:/epics/measCompR1-0/measCompApp/src/O.win32-x86'
echo "../measCompAppInclude.dbd : ../Makefile" >> measCompApp.dbd.d
"Expanding dbd"
D:\\base\\bin\\win32-x86\\dbExpand.exe -I . -I .. -I ../../../dbd -ID:/epics/synApps_5_6/support/seq-2-1-3/dbd -ID:/base/dbd -o measCompApp.dbd ../measCompAppInclude.dbd
Can't open include file "asyn.dbd"
Error at or before ""asyn.dbd"" in file "../measCompAppInclude.dbd" line 2
Can't open include file "stdSupport.dbd"
Error at or before ""stdSupport.dbd"" in file "../measCompAppInclude.dbd" line 3
Can't open include file "busySupport.dbd"
Error at or before ""busySupport.dbd"" in file "../measCompAppInclude.dbd" line 4
Can't open include file "sscanSupport.dbd"
Error at or before ""sscanSupport.dbd"" in file "../measCompAppInclude.dbd" line 5
Can't open include file "calcSupport.dbd"
Error at or before ""calcSupport.dbd"" in file "../measCompAppInclude.dbd" line 6
Can't open include file "asSupport.dbd"
Error at or before ""asSupport.dbd"" in file "../measCompAppInclude.dbd" line 7
dbExpand: Input errors, no output generated
make[3]: *** [../O.Common/measCompApp.dbd] Error 1
make[3]: Leaving directory `D:/epics/measCompR1-0/measCompApp/src/O.win32-x86'
make[2]: *** [install.win32-x86] Error 2
make[2]: Leaving directory `D:/epics/measCompR1-0/measCompApp/src'
make[1]: *** [src.install] Error 2
make[1]: Leaving directory `D:/epics/measCompR1-0/measCompApp'
make: *** [measCompApp.install] Error 2
make: Leaving directory `D:/epics/measCompR1-0'
As always, any ideas are welcome.
--Josh
--
Tim Mooney ([email protected]) (630)252-5417
Software Services Group (www.aps.anl.gov)
Advanced Photon Source, Argonne National Lab
- References:
- dbd expand errors for measurementComputing module S. Stein
- Navigate by Date:
- Prev:
caxy-1.0.0 released; CA tunneling with SSH Till Straumann
- Next:
RE: CSS with a dynamic IOC (=labview?) Chen, Xihui
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: dbd expand errors for measurementComputing module Mark Rivers
- Next:
CSS with a dynamic IOC (=labview?) Touchard Dominique
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|