Experimental Physics and
Industrial Control System

Hello all,

Is there a easy and safe way to start a not-compiled matlab .m script
via a button in MEDM?

We tried several things, but nothing was successful and safe (The worst
was blocking our server and generating GB's of log files).

I thank you, if you can give me any hints.

Best regards,
Martin


=========================================
Paul Scherrer Institut (PSI)
Martin Heiniger
Dipl. Informationstechniker HF
WBGB/002
CH-5232 Villigen PSI
SWITZERLAND

Telefon: +41 56 310 54 89
E-Mail: [email protected]
Internet: www.psi.ch
=========================================
 
 

Navigate by Date:

Prev: RE: thermocouple solutions Dalesio, Leo

Next: Re: EPICS build on armv6l Andrew Johnson

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <2012>  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: review the 2nd Public Working Draft of the pvAccess protocol specification Dalesio, Leo

Next: streamdevice: error handling for multiple lines of input from one command Rock, Judith E.

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <2012>  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024