Experimental Physics and Industrial Control System
> would it be possible to build
> EPICS directly on this system instead of building it on a different
> system?
If you are running linux on this system then you should be able to do get a host build of EPICS running with some small additions to the configure/os area of base.
Jeff
> -----Original Message-----
> From: [email protected] [mailto:[email protected]]
> On Behalf Of Florian Feldbauer
> Sent: Tuesday, June 12, 2012 1:47 AM
> To: EPICS tech talk
> Subject: EPICS build on armv6l
>
> Dear all,
>
> we have bought a Raspberry Pi Computer [1] which has an armv6l
> architecture.
> It is planed to use this inside our control system.
>
> Currently arm is only supported as target not as host for build.
> Since the Raspberry Pi has a gnu c compiler and all
> the libraries I need (also a x-server), would it be possible to build
> EPICS directly on this system instead of building it on a different
> system?
>
> Best regards,
> Florian
>
> [1] http://www.raspberrypi.org/
>
> --
> -------------------------------------
> | Florian Feldbauer |
> | Ph.D. student |
> | |
> | Institut für Experimentalphysik I |
> | Ruhr-Universität Bochum |
> | Universitätsstr. 150 |
> | D-44780 Bochum |
> | |
> | Office: NB 2/173 |
> | Phone: (+49)234 / 32-23538 |
> | Fax: (+49)234 / 32-14170 |
> | Web: http://www.ep1.rub.de |
> -------------------------------------
- References:
- EPICS build on armv6l Florian Feldbauer
- Navigate by Date:
- Prev:
EPICS build on armv6l Florian Feldbauer
- Next:
Re: EPICS build on armv6l Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
EPICS build on armv6l Florian Feldbauer
- Next:
Re: EPICS build on armv6l Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024