EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: adding a prefix to all PV names with macro substitution
From: Andrew Johnson <[email protected]>
To: Tim Mooney <[email protected]>
Cc: [email protected]
Date: Fri, 1 Jun 2012 22:51:13 -0500 (CDT)
Hi Tim,

Tim Mooney wrote:
> I agree that it would be nice to be able to pass a macro-definition
> string to dbLoadTemplate.

That feature will be coming in R3.15.  Actually a site that really wants it could use the code for it with a local 3.14 installation; see the "msi-join" branch of the epics-base project on Launchpad, which was developed against the 3.14 tree and also adds the msi program to Base rather than building it as an extension.

- Andrew
-- 
An error is only a mistake if you don't learn from it.
When you learn something from it, it becomes a lesson

References:
Re: adding a prefix to all PV names with macro substitution Tim Mooney

Navigate by Date:
Prev: Re: adding a prefix to all PV names with macro substitution Tim Mooney
Next: RE: asynManager isConnected Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: adding a prefix to all PV names with macro substitution Tim Mooney
Next: [StreamDevice] ? Pavel Masloff
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024