EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: "@init handler failed" , "Record initialization failed" and "No reply from device within 1000 ms"
From: Eric Norum <[email protected]>
To: Dirk Zimoch <[email protected]>
Cc: 洪春霞 <[email protected]>, [email protected]
Date: Thu, 24 May 2012 08:37:07 -0700
Serial port parameter changes of a LAN/Serial adapter will work if

a) Your LAN/Serial adapter supports 'RFC2217' operation (most do -- check the adapter manual for details)

and

b) you're using ASYN R4-16 or better

and

c) you add 'COM' to the port configuration line -- drvAsynIPPortConfigure("MOXA1","192.168.127.254:4001 COM",0,0,0)

On May 24, 2012, at 7:30 AM, Dirk Zimoch wrote:

> Dirk Zimoch wrote:
> 
>> I don't see where you set the baud rate. Use something like
>> asynSetOption ("MOXA1", 0, "baud", "9600")
> 
> Well, this won't work. It works only if the Moxa maps its serial lines
> to local /dev/ttyXXX devices on your PC and you use it like a local
> serial line.
> 
> With the TCP connection, you may need a different way to set the baud
> rate. I don't know how. See the Moxa manual.
> 
> Dirk
> 

-- 
Eric Norum
[email protected]



References:
"@init handler failed" , "Record initialization failed" and "No reply from device within 1000 ms" 洪春霞
Re: "@init handler failed" , "Record initialization failed" and "No reply from device within 1000 ms" Dirk Zimoch
Re: "@init handler failed" , "Record initialization failed" and "No reply from device within 1000 ms" Dirk Zimoch

Navigate by Date:
Prev: Re: "@init handler failed" , "Record initialization failed" and "No reply from device within 1000 ms" Dirk Zimoch
Next: RE: "@init handler failed" , "Record initialization failed" and "No reply from device within 1000 ms" Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: "@init handler failed" , "Record initialization failed" and "No reply from device within 1000 ms" Dirk Zimoch
Next: RE: "@init handler failed" , "Record initialization failed" and "No reply from device within 1000 ms" Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 18 Nov 2013 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·