Experimental Physics and
Industrial Control System

Troy,
Be sure that you installed the additional xming font set.


-ps


On Wed, May 23, 2012 at 4:03 PM, Troy Lutes <[email protected]> wrote:
> We are setting up an IOC for HPSync. The IOC seems to startup fine, but there are problems with the display. We have installed Xming as described in:
> http://controls.web.psi.ch/cgi-bin/twiki/view/Main/HowToSetupEPICSWin32
> Probe, alarm handler, strip tool, etc all work fine from the icons in the win32 tools folder.
>
> Medm gives the following error in the Xconsole
> [medm]
>
> MEDM Version 3.1.5: Loading aliased fonts.................
>
> SIGSEGV
>
> Does anybody have experience with Xming and medm?
> Thanks in advance,
> Troy
>
> --
> Troy Lutes
> Linux Systems Administrator
> Advanced Photon Source
> Argonne National Laboratory
> (630)252-1345

References:

medm and Xming on Windows 7 64 bit Troy Lutes

Navigate by Date:

Prev: medm and Xming on Windows 7 64 bit Troy Lutes

Next: "@init handler failed" , "Record initialization failed" and "No reply from device within 1000 ms" 洪春霞

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <2012>  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: medm and Xming on Windows 7 64 bit Troy Lutes

Next: RE: medm and Xming on Windows 7 64 bit Mark Rivers

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <2012>  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024