EPICS [edm] error

Experimental Physics and Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	[edm] error
From:	Pavel Masloff <[email protected]>
To:	EPICS Tech Talk <[email protected]>
Date:	Sat, 19 May 2012 12:49:28 +0400

I am launching an edl file and I come up with the following:

Can't open test.edl for read access.

Suggestions?

--
Best regards,

Pavel Maslov, MS
Controls Engineer at Pulsed power Lab
Efremov Institute for Electro-Physical Apparatus
St. Petersburg, Russia

Mobile: +7 (951) 672 22 19
Landline: +7 (812) 461 01 01

Navigate by Date:: Prev: Re: using areaDetector as a support library only Bruce Hill; Next: Re: [CA][waveform]max array bytes on IOC Pavel Masloff; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Re: [CA][waveform]max array bytes on IOC Pavel Masloff; Next: [CSS] commas in TextUpdate Pavel Masloff; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024