g+
g+ Communities
Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014 
<== Date ==> <== Thread ==>

Subject: Re: 回复: RE: Problem in using synApp
From: Tim Mooney <mooney@aps.anl.gov>
To: sunjl <sunjl@ihep.ac.cn>
Cc: tech-talk <tech-talk@aps.anl.gov>
Date: Wed, 16 May 2012 10:09:15 -0500 (CDT)
I'm confused.
I'm not able to find the error message "Problem!" in saveData's source code or database.
>From what I see, there are only four possibilities for the xxx:saveData_status PV:
"Inactive", "Active", "Mount err", and "I/O err".  Can you give the name of the PV that says
"Problem!"?  Is it xxx:saveData_status or xxx:saveData_message?
Tim

----- Original Message -----
From: "sunjl" <sunjl@ihep.ac.cn>
To: "Mark Rivers" <rivers@cars.uchicago.edu>, "tech-talk" <tech-talk@aps.anl.gov>
Sent: Wednesday, May 16, 2012 8:59:13 AM
Subject: 回复: RE: Problem in using synApp


Yes, I set the path and the 'Problem!' is still there. 




孙纪磊 敬启 
中国科学院高能物理研究所1号厅201室 
北京市918信箱 100049 
Sun Jilei 
Institute of High Energy Physics, Chinese Academy of Sciences, 
Accelerator Center, Room 201, Hall 1, 
19B Yuquan Lu, Shijingshan District, 
Beijing 100049, 
People's Republic of China 
Tel.: (+86)-(0)10-88236287 
Email: sunjl@ihep.ac.cn 



发件人: Mark Rivers 
发送时间: 2012-05-16 21:51 
收件人: 'sunjl' ; tech-talk 
主题: RE: Problem in using synApp 




Did you open the saveData window and give it a path to save your scans? 





From: tech-talk-bounces@aps.anl.gov [mailto:tech-talk-bounces@aps.anl.gov] On Behalf Of sunjl 
Sent: Wednesday, May 16, 2012 8:31 AM 
To: tech-talk 
Subject: Problem in using synApp 




Hi all, 





I have built the synApps_4_6 on my PC successfully, but when start the MEDM file "scan.adl" , the 'SAVE DATA ’ still in 'Problem!' state. 





Would you give me some help? 





Thanks and Best Regards 









孙纪磊 敬启 
中国科学院高能物理研究所 1 号厅 201 室 


北京市 918 信箱 100049 
Sun Jilei 


Institute of High Energy Physics, Chinese Academy of Sciences, 
Accelerator Center, Room 201, Hall 1, 
19B Yuquan Lu, Shijingshan District, 
Beijing 100049, 
People's Republic of China 
Tel.: (+86)-(0)10-88236287 
Email: sunjl@ihep.ac.cn 

-- 
Tim Mooney (mooney@aps.anl.gov) (630)252-5417
Software Services Group (www.aps.anl.gov)
Advanced Photon Source, Argonne National Lab


Replies:
Re: 回复: RE: Problem in using synApp Tim Mooney
References:
回复: RE: Problem in using synApp sunjl

Navigate by Date:
Prev: ArchiveViewer issue Dilan Madagodahettige Don
Next: Re: EPICS3.14.12 RTEMS patch for nfsMount() ( was Re: Autosave and RTEMS-4.10) Andrew Johnson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014 
Navigate by Thread:
Prev: 回复: RE: Problem in using synApp sunjl
Next: Re: 回复: RE: Problem in using synApp Tim Mooney
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014 
ANJ, 18 Nov 2013 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICSv4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·