Hi Huili,
From the printout it looks like you might have loaded two IOCs at the
same time. If you can check the generic start-up st.cmd file (maybe
under the localhome folder for example) , you might find two entries
there. If there are more than one, commenting out one will solve the
problem.
Best regards,
Jim
Hytec Electronics Ltd
Quoting huili <[email protected]>:
My ioc download message about Hy8002 as this:
IPAC3 = ipacAddHy8002("9,2")
filename="../../../src/libCom/osi/devLib.c" line number=373
Specified device address overlaps another device VME A16 0X00004C00 -
OX00004C9F Requested by drvHy8002filename="../../../src/libCom/osi/devLib.c"
line number=399
This device already owns the address range VME A16 0X00004C00 -
0X00004C9F Owned by drvHy8002ipacAddCarrier: Hytec VICB8002 driver returned
an error.
IPAC3 = 0x1e3ee420: value = 39321603 = 0x2580003
I don't know how to so ,Please give me a soluton!
Best wishes!
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
