Experimental Physics and Industrial Control System
|
Subject: |
Re: [ASYN-vxi11] can't connect to Tektronix scope on Fedora 16 |
From: |
Pavel Masloff <[email protected]> |
To: |
EPICS Tech Talk <[email protected]> |
Date: |
Tue, 20 Mar 2012 17:12:09 +0300 |
UPDATE:
i can talk to the scope more or less. but what do these error messages mean and where do they come from?? I haven't had such on RHEL...
On Tue, Mar 20, 2012 at 5:47 PM, Pavel Masloff <[email protected]> wrote:
Hello all,
The Tektronix TDS3000/5000 support worked perfectly well on Red Hat Linux 5.5. Now I have decided to run an IOC on Fedora 16 and here's what I have got:
############################################################################
## EPICS R3.14.12.2 $Date: Mon 2011-12-12 14:09:32 -0600$ ## EPICS Base built Mar 14 2012 ############################################################################ 2012/03/20 17:34:57.555 scopeTest:: queueRequest failed
2012/03/20 17:34:57.556 scopeTest:: queueRequest failed 2012/03/20 17:34:58.057 scopeTest:clearMenuBO queueRequest failed port L0 not connected 2012/03/20 17:34:58.057 scopeTest:initBO queueRequest failed port L0 not connected
2012/03/20 17:34:58.057 scopeTest:frontPanelLockBO queueRequest failed port L0 not connected 2012/03/20 17:34:58.057 scopeTest:ethernetNameSI queueRequest failed port L0 not connected iocRun: All initialization complete
## Start any sequence programs epics> 2012/03/20 17:34:58.557 scopeTest:scopeBusyBI queueRequest failed port L0 not connected 2012/03/20 17:34:59.057 scopeTest:scopeBusyBI queueRequest failed port L0 not connected
2012/03/20 17:34:59.557 scopeTest:scopeBusyBI queueRequest failed port L0 not connected 2012/03/20 17:35:00.057 scopeTest:scopeBusyBI queueRequest failed port L0 not connected 2012/03/20 17:35:00.557 scopeTest:scopeBusyBI queueRequest failed port L0 not connected
2012/03/20 17:35:01.057 scopeTest:scopeBusyBI queueRequest failed port L0 not connected 2012/03/20 17:35:01.065 L0 vxi11 clientCall errno Success clnt_stat 5 2012/03/20 17:35:01.065 L0 vxiCreateIrqChannel (create_intr_chan): RPC: Timed out
2012/03/20 17:35:01.065 L0 Warning -- SRQ not operational. ############################################################################
I have double-checked it works on RHEL with version of ASYN, BASE, SNC, etc! What can be the problem with Fedora? I am using epics base 3-14-12-2, ASYN 4-18. And connect to the scope via direct Ethernet connection:
vxi11Configure("L0", "172.20.92.3", 0, 0.0, "inst0", 0)
-- Best regards,
Pavel Maslov, MS Controls Engineer at Pulsed power Lab
Efremov Institute for Electro-Physical Apparatus St. Petersburg, Russia
Mobile: +7 (951) 672 22 19
Phone: +7 (812) 461 01 01
-- Best regards,
Pavel Maslov, MS Controls Engineer at Pulsed power Lab Efremov Institute for Electro-Physical Apparatus
St. Petersburg, Russia
Mobile: +7 (951) 672 22 19
Phone: +7 (812) 461 01 01
- Replies:
- RE: [ASYN-vxi11] can't connect to Tektronix scope on Fedora 16 Mark Rivers
- References:
- [ASYN-vxi11] can't connect to Tektronix scope on Fedora 16 Pavel Masloff
- Navigate by Date:
- Prev:
Re: BOY: Macro for workspace directory? Kasemir, Kay
- Next:
RE: [ASYN-vxi11] can't connect to Tektronix scope on Fedora 16 Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
[ASYN-vxi11] can't connect to Tektronix scope on Fedora 16 Pavel Masloff
- Next:
RE: [ASYN-vxi11] can't connect to Tektronix scope on Fedora 16 Mark Rivers
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|
ANJ, 18 Nov 2013 |
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·
·
Search
·
EPICS V4
·
IRMIS
·
Talk
·
Bugs
·
Documents
·
Links
·
Licensing
·
|