Yes we use this CPU in several configuration for Acquisition systems for Magnet Protection system here at Saclay (W7X stellerator magnets and R3B GSI magnet), at CERN (COMPASS solenoid) and Tokaï (T2K J-PARC).
The oldest configuration is more than 10 y.o. We never had any problem with this CPU. Quite different from the present situation where we had a lot of problem with our present 5500 CPU choice.
We are running an old configuration on them: VxWorks 2.5 buit in 2000 and EPICS 3.13
Jean-François
-----Message d'origine-----
De : [email protected] [mailto:[email protected]] De la part de Bill Lavender
Envoyé : lundi 12 mars 2012 22:33
À : [email protected]
Objet : MVME2434-1
I have recently acquired an MVME2434-1 system controller board. Is this something that anyone has ever used with EPICS? Thanks.
Bill Lavender
- Replies:
- Re: MVME2434-1 Bill Lavender
- References:
- MVME2434-1 Bill Lavender
- Navigate by Date:
- Prev:
Re: [Operating System platforms] which one do you use? Paul Sichta
- Next:
CSS Training Questionnaire for Spring 2012 EPICS Meeting Kasemir, Kay
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: MVME2434-1 Till Straumann
- Next:
Re: MVME2434-1 Bill Lavender
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|