EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: RE: Fwd:
From: <[email protected]>
To: <[email protected]>, <[email protected]>
Date: Mon, 12 Mar 2012 13:22:46 +0000
From: [email protected] [mailto:tech-talk-
> I am trying to load a small epics application into the mvme2304 board
> in VME crate. After following the instructions  from tutorial from
> EPICS web site, (and running the "NBO" command from PPC-BUG of the
> cpu,) I still do not find it is working.

Alas, I am wholly unfamiliar with RTEMS, but a few obvious things spring to mind:

1. Is there a shell, do you know, built into your RTEMS image?

2. What serial settings are built into your RTEMS image?

3. Indeed, is your RTEMS image even built to use the right serial device?

Don't worry about EPICS until RTEMS boots...

Hopefully other people on this list have more of a clue about RTEMS.


References:
Fwd: Qazi Zia-ul-Haque

Navigate by Date:
Prev: Fwd: Qazi Zia-ul-Haque
Next: RE: Invitation to test cothread.catools release candidate michael.abbott
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Fwd: Qazi Zia-ul-Haque
Next: RE: Fwd: michael.abbott
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024