Experimental Physics and
Industrial Control System

On 03/07/2012 11:17 PM, Feng Laurence wrote:

Hi,
My lab is currently estimating the possibility of using VME machine in
PKU-SETF as magnet power supply control. However, the hardware
provider told us that VxWork may not be a cost-effected solution for
labs of our scale. And as far as they know, running EPICS on  free
RTOS such like RTEMS is not well proved. Seems I'm not familiar with
the field, I would like to post the questions here:

1, What's the status of EPICS on RTEMS, is it still under development
or already ready-for-use?

Yes, EPICS on RTEMS is already used at NSLS beamlines at BNL.

2, Is there any operating EPICS running on RTEMS on VME machine?

Yes.

Cheers,
Kate

References:

What's the status of EPICS on RTEMS? Feng Laurence

Navigate by Date:

Prev: Converting driver of R3.13 Applications to R3.14 Bai Jiaoni

Next: Re: References about EPICS Dirk Zimoch

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <2012>  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: What's the status of EPICS on RTEMS? Williams Jr., Ernest L.

Next: Converting driver of R3.13 Applications to R3.14 Bai Jiaoni

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <2012>  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024