1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | Re: CSS X-Y Graph |
From: | John Dobbins <[email protected]> |
To: | [email protected] |
Date: | Tue, 21 Feb 2012 19:36:22 -0500 |
Andrew,I don't know if this matters but my waveform is actually one of the outputs of a genSub record. It has a NOVA field but I could alternately use another output as a array length indicator field.
BTW, I am also open to doing this in EDM or MEDM or ??? John Dobbins On 2/21/2012 7:17 PM, Andrew Johnson wrote:
Hi Michael, On 2012-02-21 Michael Davidsaver wrote:I too have had trouble doing this. I was able to setup a rule to set the buffer size from the NORD field of a waveform record. The result was that, when the size was reduced, the start of the waveform was removed instead of the end. So not very useful.Also note that the NORD field of a waveform record does not get monitors posted on it unless there is device support that explicitly does that, so this wouldn't necessarily work too well anyway (you could forward-link the waveform record to a longin that reads the NORD field and use that instead though). In 3.15 any device support will still be responsible for posting monitors if it sets NORD, but the record and soft device support will also do it when they set NORD. - Andrew