EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: RE: VME SCALER, I2C bus
From: Mark Rivers <[email protected]>
To: Tim Mooney <[email protected]>, GOURNAY Jean-Francois <[email protected]>
Cc: "[email protected]" <[email protected]>
Date: Thu, 9 Feb 2012 13:55:25 +0000
Hi Jean-Francois,

The documentation specfically for my SIS3820 support is here:

http://cars.uchicago.edu/software/epics/mcaStruck.html

The EPICS Hardware support list by Manufacturer is a good place to look if you want to determine if a piece of hardware is supported:

http://www.aps.anl.gov/epics/modules/manufacturer.php#Struck

Cheers,
Mark


________________________________________
From: [email protected] [[email protected]] on behalf of Tim Mooney [[email protected]]
Sent: Thursday, February 09, 2012 7:16 AM
To: GOURNAY Jean-Francois
Cc: [email protected]
Subject: Re: VME SCALER, I2C bus

Hi J. F.,

The Struck 3820 is supported by Mark Rivers, both as a scaler and as a multichannel scaler.
The driver and the mca record (for MCS support) are in the mca module
http://cars.uchicago.edu/software/epics/mca.html
and the scaler record is in the std module
http://www.aps.anl.gov/bcda/synApps/std/std.html.

Tim

----- Original Message -----
> From: "GOURNAY Jean-Francois" <[email protected]>
> To: [email protected]
> Sent: Thursday, February 9, 2012 5:08:36 AM
> Subject: VME SCALER, I2C bus
> Hello,
>
>
>
> We are looking for a VME scaler with EPICS support for the Beam Loss
> Monitors we will used in the frame of IFMIF-EVEDA project.
>
> I saw some discussion between Mark Rivers and Jay Steele in 2010
> concerning the Struck 3820 board. Is this module really supported with
> 3.14. If yes by who?
>
>
>
> Another question, we are also considering the use of I2C bus for the
> configuration of the 200 thresholds of the FE electronics of these
> monitors. Is there some experience of the use of this bus in the
> community?
>
>
>
> Thanks
>
>
>
> J.F. Gournay
>
> CEA Saclay

--
Tim Mooney ([email protected]) (630)252-5417
Software Services Group (www.aps.anl.gov)
Advanced Photon Source, Argonne National Lab


References:
VME SCALER, I2C bus GOURNAY Jean-Francois
Re: VME SCALER, I2C bus Tim Mooney

Navigate by Date:
Prev: Re: cothread problem on Mac osx Shen, Guobao
Next: RE: cothread problem on Mac osx michael.abbott
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: VME SCALER, I2C bus Tim Mooney
Next: AsynDriver build errors on MinGW Josh Stein
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  <20122013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 18 Nov 2013 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·