Experimental Physics and
Industrial Control System

Benjamin Franksen <[email protected]> · Wed, 1 Feb 2012 14:42:07 +0100

On Wednesday, February 01, 2012, Szalata, Zenon M. wrote:
> I tried the latest version of sequencer (R2.1.4), which did not quite
> build correctly.
> I did not think that mattered.  I now have regressed
> to an earlier version of sequencer (R2.0.12) and std built without
> errors. I will look again at the R2.1.4 version of sequencer, see if I
> can fix that. Thanks again,

I can help with that if you send me the compiler output.

Cheers
Ben

> Zen
>
> From: Mark Rivers [mailto:[email protected]]
> Sent: Tuesday, January 31, 2012 4:56 PM
> To: Szalata, Zenon M.; [email protected]
> Subject: RE: std_R3_1
>
> femto is an SNL program.  Do you have the sequencer in your
> configure/RELEASE file in std?
>
> Mark
>
>
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Szalata, Zenon M.
> Sent: Tuesday, January 31, 2012 6:44 PM
> To: [email protected]
> Subject: std_R3_1
>
> Building std_R3_1 fails on RHEL6 64bit with this error:
>
> /usr/bin/gcc -c  -D_POSIX_C_SOURCE=199506L -D_POSIX_THREADS
> -D_XOPEN_SOURCE=500           -D_X86_64_  -DUNIX  -D_BSD_SOURCE -Dlinux
> -D_REENTRANT   -g   -Wall      -m64     -fPIC -MMD -I. -I../O.Common -I.
> -I.. -I../../../include/os/Linux -I../../../include
> -I/afs/slac/g/testfac/rhel6/epics/R3.14.12.2/modules/seq/R2.1.4/include
> -I/afs/slac/g/testfac/rhel6/epics/R3.14.12.2/modules/asyn/R4.18/include
> -I/afs/slac/g/testfac/rhel6/epics/R3.14.12.2/base/include/os/Linux
> -I/afs/slac/g/testfac/rhel6/epics/R3.14.12.2/base/include
> ../pvHistory.c make[3]: *** No rule to make target `femto.o', needed by
> `libstd.a'.  Stop. make[3]: Leaving directory
> `/afs/slac.stanford.edu/g/testfac/vol1/rhel6/epics/R3.14.12.2/modules/st
> d/R3.1/stdApp/src/O.linux-x86_64' make[2]: *** [install.linux-x86_64]
> Error 2
> make[2]: Leaving directory
> `/afs/slac.stanford.edu/g/testfac/vol1/rhel6/epics/R3.14.12.2/modules/st
> d/R3.1/stdApp/src' make[1]: *** [src.install] Error 2
> make[1]: Leaving directory
> `/afs/slac.stanford.edu/g/testfac/vol1/rhel6/epics/R3.14.12.2/modules/st
> d/R3.1/stdApp' make: *** [stdApp.install] Error 2
>
> I did not try building on other architectures, so I don't know the extent
> of my problem. What am I missing on this computer?
>
> Thanks for any help,
> Zen

________________________________

Helmholtz-Zentrum Berlin für Materialien und Energie GmbH

Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V.

Aufsichtsrat: Vorsitzender Prof. Dr. Dr. h.c. mult. Joachim Treusch, stv. Vorsitzende Dr. Beatrix Vierkorn-Rudolph
Geschäftsführerin: Prof. Dr. Anke Rita Kaysser-Pyzalla

Sitz Berlin, AG Charlottenburg, 89 HRB 5583

Postadresse:
Hahn-Meitner-Platz 1
D-14109 Berlin

http://www.helmholtz-berlin.de

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System