1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 <2012> 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
<== Date ==> | <== Thread ==> |
---|
Subject: | RE: std_R3_1 |
From: | "Szalata, Zenon M." <[email protected]> |
To: | Mark Rivers <[email protected]>, "[email protected]" <[email protected]> |
Date: | Tue, 31 Jan 2012 17:17:10 -0800 |
Thanks Mark, I tried the latest version of sequencer (R2.1.4), which did not quite build correctly. I did not think that mattered. I now have regressed to an earlier version of sequencer (R2.0.12) and std built without errors. I will look again at the R2.1.4 version of sequencer, see if I can fix that. Thanks again, Zen From: Mark Rivers [mailto:[email protected]] femto is an SNL program. Do you have the sequencer in your configure/RELEASE file in std? Mark From: [email protected] [mailto:[email protected]] On Behalf Of Szalata, Zenon M. Building std_R3_1 fails on RHEL6 64bit with this error: /usr/bin/gcc -c -D_POSIX_C_SOURCE=199506L -D_POSIX_THREADS -D_XOPEN_SOURCE=500 -D_X86_64_ -DUNIX -D_BSD_SOURCE -Dlinux -D_REENTRANT -g -Wall -m64 -fPIC -MMD -I. -I../O.Common -I. -I.. -I../../../include/os/Linux -I../../../include -I/afs/slac/g/testfac/rhel6/epics/R3.14.12.2/modules/seq/R2.1.4/include -I/afs/slac/g/testfac/rhel6/epics/R3.14.12.2/modules/asyn/R4.18/include -I/afs/slac/g/testfac/rhel6/epics/R3.14.12.2/base/include/os/Linux -I/afs/slac/g/testfac/rhel6/epics/R3.14.12.2/base/include ../pvHistory.c make[3]: *** No rule to make target `femto.o', needed by `libstd.a'. Stop. make[3]: Leaving directory `/afs/slac.stanford.edu/g/testfac/vol1/rhel6/epics/R3.14.12.2/modules/std/R3.1/stdApp/src/O.linux-x86_64' make[2]: *** [install.linux-x86_64] Error 2 make[2]: Leaving directory `/afs/slac.stanford.edu/g/testfac/vol1/rhel6/epics/R3.14.12.2/modules/std/R3.1/stdApp/src' make[1]: *** [src.install] Error 2 make[1]: Leaving directory `/afs/slac.stanford.edu/g/testfac/vol1/rhel6/epics/R3.14.12.2/modules/std/R3.1/stdApp' make: *** [stdApp.install] Error 2 I did not try building on other architectures, so I don’t know the extent of my problem. What am I missing on this computer? Thanks for any help, Zen |