Hi Phil,
I believe the folks at the Australian Synchrotron have written such support.
I recently communicated with Galil, and they said they were planning to write an EPICS driver using the new Model 3 C++ based driver support, but I suspect they have not done that yet.
Mark
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Phillip Sorensen
Sent: Monday, January 23, 2012 8:03 AM
To: TechTalk EPICS
Subject: Motor record support for Galil DMC-2183
Hello,
I see references to support for Galil motor drivers, but I have not
found links to any code. Does anyone has device support (specifically
for the motor record) for the Galil DMC-2183 or similar unit.
Thanks,
Phil Sorensen
- References:
- Motor record support for Galil DMC-2183 Phillip Sorensen
- Navigate by Date:
- Prev:
Re: Motor record support for Galil DMC-2183 Wesley Moore
- Next:
CSS Basic EPICS package and Post Analyzer John Dobbins
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Motor record support for Galil DMC-2183 Wesley Moore
- Next:
Re: Motor record support for Galil DMC-2183 Emmanuel Mayssat
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|