Experimental Physics and
Industrial Control System

John Hammonds <[email protected]> · Tue, 06 Dec 2011 09:01:54 -0600

Just one more data point. I was able to download the whole thing but I

am sitting on site at APS.

On 12/6/2011 8:49 AM, Paul Nord wrote:

Same here.

On Dec 6, 2011, at 8:30 AM, Fabian S. wrote:

Thx for the update but it seems that downloading the file completely is
not possible. It stops after ~35MB with an error 408. I've checked it
from different locations as well as different browsers.

# wget http://www.aps.anl.gov/bcda/synApps/tar/synApps_5_6.tar.gz
Connecting to www.aps.anl.gov (164.54.8.141:80)
synApps_5_6.tar.gz    22% |******                         | 34268k
00:10:41 ETA
#

Tim Mooney wrote:

Dear folks,

synApps 5.6 is now available on our web site, http://www.aps.anl.gov/bcda/synApps/
This version was tested mostly with EPICS 3.14.12.1.  Note that the build is
configured differently than in previous releases, with architecture-specific
paths to EPICS-base and synApps-support directories, and with new dependences
on tools (notably msi 1.5) and system resources.

Here are top-level docs:
http://www.aps.anl.gov/bcda/synApps/synApps_5_6.html

Here are collected module-specific docs:
http://www.aps.anl.gov/bcda/synApps/synApps_docs_all.html

--
John Hammonds
Software Services Group
APS Engineering Support Division

Argonne National Laboratory
[email protected]<mailto:[email protected]>
(630)252-5317

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System