Just letting everyone know, I've been working on a BACnet (Building Automation & Control network, www.bacnet.org<http://www.bacnet.org/>) driver for EPICS and
version 1 is almost ready. The driver interfaces with BACnet/IP devices such as Siemens, JCI, etc... But will do MSTP too;)
You can add the driver to EPICS build and use the "Record instio.string" to setup your field devices.
Currently supports: AI, AO, BI, BO, MBBI and STRINGIN record types.
Let me know who is interested. When it is ready, you can download here: "http://ics-web.sns.ornl.gov/webb/BACnet/index.html"
You can email me questions [email protected]<mailto:[email protected]>
Brad Webb
Controls Engineer
Bldg: 8600
Rm: C-366-C
865-924-5877
[email protected]<mailto:[email protected]>
Spallation Neutron Source
- Navigate by Date:
- Prev:
Re: EPICS Base 3.14.12.2-rc1 available for testing Pelaia II, Tom
- Next:
finite() Till Straumann
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
UPDATE: CA Lab 32/64 Bit (interface between LabVIEW and EPICS) Carsten Winkler
- Next:
finite() Till Straumann
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|