Experimental Physics and
Industrial Control System

"Piccoli, Luciano" <[email protected]> · Wed, 23 Nov 2011 15:56:43 -0800

Hi,

I'm writing a simple asyn driver which I started out from the HMS example. When starting the ioc I get these messages:

	lpiccoli@cdlx22 iocMksu]$ ./st.cmd
	#! ../../bin/linux-x86/example
	dbLoadDatabase("../../dbd/example.dbd")
	example_registerRecordDeviceDriver(pdbbase)
	drvMksu_init()
	drvAsynIPPortConfigure("MksuServer", "194.168.0.21:56789 UDP", 0, 0, 1)
	initMksu("Mksu", "MksuServer")
	dbLoadTemplate("mksu.substitutions")
	iocInit()
	Starting iocInit
	############################################################################
	## EPICS R3.14.10-lcls1 $R3-14-10$ $2008/10/27 19:39:04$
	## EPICS Base built Jul 15 2009
	############################################################################
	KLYS:IN20:3130:MOD_TRIG_DELAY_READ devAsynInt32::initCommon  Link must be INST_IO
	KLYS:IN20:3130:WF_TRIG_DELAY_READ devAsynInt32::initCommon  Link must be INST_IO
	KLYS:IN20:3130:MOD_TRIG_DELAY_WRITE devAsynInt32::initCommon  Link must be INST_IO
	KLYS:IN20:3130:WF_TRIG_DELAY_WRITE devAsynInt32::initCommon  Link must be INST_IO
	iocRun: All initialization complete
	epics>     

It looks like something is not getting set correctly, the link type of those records should be INST_IO. Using gdb I see that they have the link type set to 0 (CONSTANT).

Am I missing something in the st.cmd file? Suggestions are welcome :)

Thank you,
Luciano

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System