EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: RE: asyn / vxi11 / trace output
From: "Mark Rivers" <[email protected]>
To: "John Dobbins" <[email protected]>, "EPICS Tech-Talk" <[email protected]>
Date: Thu, 17 Nov 2011 22:34:21 -0600
John,
 
With the gpib device I think you may have to enable asynTrace not on addr=-1, but rather on addr=GPIB address of the 5312 counter.  Have you tried that? 
 
"inst" devices are directly connected to a single device, but "gpib" devices are connected to a GPIB controller which can be in turn connected to several devices.
 
Mark
 

________________________________

From: [email protected] on behalf of John Dobbins
Sent: Thu 11/17/2011 6:53 PM
To: EPICS Tech-Talk
Subject: asyn / vxi11 / trace output



All,

In have an EPICS 3.14.9 installation, asyn 4-9, StreamDevice 2-3

Two IOCs, each with a connection to a vxi11 device

case 1) Boonton 4540 power meter with LAN connection

    vxi11Configure ("L0","172.18.38.21",1,1000,"inst0")

    asynSetTraceMask("L0",-1,0x09)
    asynSetTraceIOMask("L0",-1,0x2)


Trace output appears on IOC console as I am accustomed to, i.e.
transmitted and received messages appear at console.


case 2) Agilent 53132 counter connected through HP E5810 (lan-to-gpib)

    vxi11Configure ("L0","172.18.22.21",1,1000,"gpib0")

    asynSetTraceMask("L0",-1,0x09)
    asynSetTraceIOMask("L0",-1,0x02)

in this case communication is fine but I don't see trace output.


Any ideas?

Regards,

John Dobbins




Replies:
RE: asyn / vxi11 / trace output John Dobbins
References:
asyn / vxi11 / trace output John Dobbins

Navigate by Date:
Prev: using tcp with modbus over asyn James Stevens
Next: RE: using tcp with modbus over asyn Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: asyn / vxi11 / trace output John Dobbins
Next: RE: asyn / vxi11 / trace output John Dobbins
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 18 Nov 2013 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·