Experimental Physics and
Industrial Control System

Tim Mooney <[email protected]> · Fri, 14 Oct 2011 09:34:17 -0500 (CDT)

Linda,

It's in here:
http://www.aps.anl.gov/bcda/synApps/vac/vac.html

Tim

----- Original Message -----
> From: "Mohan Ramanathan" <[email protected]>
> To: "Linda Pratt" <[email protected]>
> Cc: [email protected]
> Sent: Friday, October 14, 2011 9:00:11 AM
> Subject: Re: EPICS support for Granville Phillips Series 307 Vacuum Gauge Controller
> hi:
> 
> 
> At APS we have been using GP307 , GP350 and now Televac.
> 
> 
> I had rewritten our old driver into asyn in 2007. It does not use
> streams but the driver is universal with one generic VanSen custom
> record. The driver can be told to run any of these devices at startup
> in the configuration.
> 
> 
> Feel free to contact me or it must be in the repository.
> 
> 
> Mohan
> 
> 
> 
> 
> -----------------------------------------------------------------------------------------------------
> Mohan Ramanathan Senior Beamline Engineer
> [email protected] Advanced Photon Source
> (630)-252-3773 (off)/(630)-822-5625(Cell) Argonne National Laboratory
> (630)-252-7187 (FAX) Argonne, IL 60439
> 
> -----------------------------------------------------------------------------------------------------
> 
> 
> 
> On Oct 14, 2011, at 3:25 AM, < [email protected] > wrote:
> 
> 
> 
> 
> 
> Is there EPICS support available for the Granville Phillips Series 307
> Vacuum Gauge Controller?
> Something based on StreamDevice would be ideal but information about
> any existing support would be appreciated.
> 
> Thanks,
> 
> 
> Linda Pratt
> Software Systems Engineer
> Controls Department
> [email protected]
> +44 (0)1235 778058
> www.diamond.ac.uk
> Diamond Light Source Ltd
> Diamond House
> Harwell Science and Innovation Campus
> DIDCOT
> Oxfordshire
> OX11 0DE
> UK
> 
> 
> 
> 
> 
> 
> --
> 
> This e-mail and any attachments may contain confidential, copyright
> and or privileged material, and are for the use of the intended
> addressee only. If you are not the intended addressee or an authorised
> recipient of the addressee please notify us of receipt by returning
> the e-mail and do not use, copy, retain, distribute or disclose the
> information in or attached to the e-mail.
> Any opinions expressed within this e-mail are those of the individual
> and not necessarily of Diamond Light Source Ltd.
> Diamond Light Source Ltd. cannot guarantee that this e-mail or any
> attachments are free from viruses and we cannot accept liability for
> any damage which you may sustain as a result of software viruses which
> may be transmitted in or with the message.
> Diamond Light Source Limited (company no. 4375679). Registered in
> England and Wales with its registered office at Diamond House, Harwell
> Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United
> Kingdom

-- 
Tim Mooney ([email protected]) (630)252-5417
Software Services Group (www.aps.anl.gov)
Advanced Photon Source, Argonne National Lab

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System