EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: RE: Newport ESP300
From: "Mark Rivers" <[email protected]>
To: "Chen Xue" <[email protected]>, <[email protected]>
Date: Wed, 21 Sep 2011 09:12:47 -0500
We have used the Moxa 4-port terminal servers and the Digi single-port
servers and are happy with both of them.

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Chen Xue
Sent: Wednesday, September 21, 2011 8:55 AM
To: [email protected]
Subject: Newport ESP300

Hi,

We're going to use a Newport ESP300 motion controller. Could someone 
give me suggestion which device is most convenient to use to connect 
RS-232 serial device to the network?

Thanks!

Chen


Replies:
Re: Newport ESP300 Chen Xue
References:
Newport ESP300 Chen Xue

Navigate by Date:
Prev: Newport ESP300 Chen Xue
Next: Re: Newport ESP300 Chen Xue
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Newport ESP300 Chen Xue
Next: Re: Newport ESP300 Chen Xue
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 18 Nov 2013 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·