Experimental Physics and
Industrial Control System

"J. Lewis Muir" <[email protected]> · Fri, 24 Jun 2011 09:49:00 -0500

On 6/24/11 8:51 AM, Benjamin Franksen wrote:
> On Friday, June 24, 2011, Benjamin Franksen wrote:
>> the latest snapshot I uploaded today fixes the remaining problems when
>> running the tests.
> 
> I made some last-minute stupid errors when uploading. If you have downloaded
> the snapshot before this message was sent, then please download again. Sorry
> for any inconvenience this may have caused.

Hi, Ben.

It builds without any warnings on my system.

The tests didn't hang up, but it looks like not all of them
passed. (?)  Here's the output:

===
$ make -s runtests
test.t .. 1/15
#   Failed test at test.t line 47.
test.t .. 15/15 # Looks like you failed 1 test of 15.
test.t .. Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/15 subtests

Test Summary Report
-------------------
test.t (Wstat: 256 Tests: 15 Failed: 1)
  Failed test:  2
  Non-zero exit status: 1
Files=1, Tests=15,  7 wallclock secs ( 0.02 usr  0.00 sys +
5.03 cusr  1.25 csys =  6.30 CPU)
Result: FAIL
Failed 1/1 test programs. 1/15 subtests failed.
array.t .......... ok
assign.t ......... ok
change.t ......... ok
local.t .......... ok
pvSync.t ......... ok
safeMonitor.t .... ok
opttVar.t ........ ok
userfunc.t ....... Starting iocInit
iocRun: All initialization complete
userfunc.t ....... ok
bittypes.t ....... Starting iocInit
iocRun: All initialization complete
bittypes.t ....... ok
evflag.t ......... Starting iocInit
iocRun: All initialization complete
evflag.t ......... ok
pvGet.t .......... Starting iocInit
iocRun: All initialization complete
pvGet.t .......... ok
pvPutAsync.t ..... Starting iocInit
iocRun: All initialization complete
pvPutAsync.t ..... ok
norace.t ......... Starting iocInit
iocRun: All initialization complete
norace.t ......... ok
bittypesIoc.t .... Starting iocInit
iocRun: All initialization complete
bittypesIoc.t .... ok
evflagIoc.t ...... Starting iocInit
iocRun: All initialization complete
evflagIoc.t ...... ok
pvGetIoc.t ....... Starting iocInit
iocRun: All initialization complete
pvGetIoc.t ....... ok
pvPutAsyncIoc.t .. Starting iocInit
iocRun: All initialization complete
pvPutAsyncIoc.t .. ok
noraceIoc.t ...... Starting iocInit
iocRun: All initialization complete
noraceIoc.t ...... ok
All tests successful.
Files=18, Tests=576, 106 wallclock secs ( 0.14 usr  0.04 sys +
10.38 cusr  2.73 csys = 13.29 CPU)
Result: PASS
queueTest.t .. ok
All tests successful.
Files=1, Tests=252,  8 wallclock secs ( 0.03 usr  0.00 sys +
10.93 cusr  3.63 csys = 14.59 CPU)
Result: PASS
===

System info:

* Processor: 2.3 GHz Intel Core i7
* Memory: 8 GB
* OS: Mac OS X 10.6.7
* EPICS Base 3.14.11 (+ Known Problems patches)

Thanks,

Lewis

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System