Experimental Physics and
Industrial Control System

"Jim Chen" <[email protected]> · Fri, 24 Jun 2011 09:46:05 +0100

Thanks Michael,

That's exactly the cause apart from the shared library file is named now
libCalc.so instead of the one with version like libCalc.so.3.14.

One other thing in the edm release is that there is still a line in
edmObjects file even in the latest ver1-12-52 that is pointing to
/home/Sinclair/edm..., not $(EDMLIBS)/.... Looks like a typo.

	activeRampButtonClass /home/sinclair/edm/libEdmBase.so Controls Ramp
Button

This fails the build each time and one has to manually modify it. Maybe John
can amend it in the new release?

Jim
Hytec Electronics Ltd.
Tel: +44 (0) 118 975 7770
Fax: +44 (0) 118 975 7566
Web: www.hytec-electronics.co.uk
Incorporated in England No 1246940
VAT NO GB 285 2479 27
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

> -----Original Message-----
> From: Davidsaver, Michael [mailto:[email protected]]
> Sent: 23 June 2011 18:30
> To: Jim Chen; [email protected]
> Subject: RE: motorx_all_mc.edl edm screen problem
> 
> Hi Jim,
> 
> Check in the edmPvObjects file.  It should have a line like
> 
> CALC <extensions>/lib/linux-x86/libCalc.so.3.14 Calculation PV
> 
> 
> > -----Original Message-----
> > From: [email protected] [mailto:tech-talk-
> > [email protected]] On Behalf Of Jim Chen
> > Sent: Thursday, June 23, 2011 10:13 AM
> > To: [email protected]
> > Subject: motorx_all_mc.edl edm screen problem
> >
> > Hello,
> >
> > Has anybody come across the following errors when running
> > motorx_all_mc.edl
> > edm screen with command:
> >
> > <extensions>/bin/linux-x86/edm -x -m "P=CARD1:,M=axis0"
> > motorx_all_mc.edl
> >
> > errors messages:
> >
> > Unkonwn PV Factory for PV 'CALC\{(((A=0)&&(B=0)))}(CARD1:axis0.DMOV,
> > CARD1:axis0.STAT)'
> > Unkonwn PV Factory for PV 'CALC\{(A)}(CARD1:axis0.LLS)'
> > Unkonwn PV Factory for PV 'CALC\{(A)}(CARD1:axis0.HOMF)'
> > Unkonwn PV Factory for PV 'CALC\{(A)}(CARD1:axis0.HOMR)'
> > Unkonwn PV Factory for PV 'CALC\{(A)}(CARD1:axis0.HLS)'
> > Unkonwn PV Factory for PV 'CALC\{(A)}(CARD1:axis0.LVIO)'
> > ......
> >
> > The edm screen loaded fine but the above fields are in white yet I
> can
> > still
> > control the motor though.
> >
> > My environment is Debian Linux 2.6.32-34squeezel, EPICS 3.14.12.1,
> > asyn-4.16, edm-1-12-41 and the latest motor drivers.
> >
> > Many thanks,
> >
> > Jim
> > Hytec Electronics Ltd.
> > Tel: +44 (0) 118 975 7770
> > Fax: +44 (0) 118 975 7566
> > Web: www.hytec-electronics.co.uk
> > Incorporated in England No 1246940
> > VAT NO GB 285 2479 27
> > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System