On Jun 5, 2011, at 7:34 PM, <[email protected]> wrote:
> Hi, all;
>
> I have a long series of bi record to process, which have an access to
> a hardware register, say, every 5 seconds.
>
> The number of records reaches a few to several thousands. In this case,
> which one of the following two options is better or no essential
> difference from performance point of view?
>
> 1)Chains all the records by using FLNK and process the first one every
> 5 second
A FLNK chain of several thousand records is likely to cause stack overflow on RTEMS or vxWorks and perhaps even on Linux/OS X.
>
> 2)Put them all into the “5 second” scan list
>
> I recognize that measuring it is no big deal, but I´d like to ask the
> experts first expecting one of you to point out something else to
> consider, which I may be overlooking, other than performance issue.
>
> Thanks a lot in advance.
>
> J. Odagiri, High Energy Research Organization (KEK)
>
>
>
--
Eric Norum
[email protected]
- Replies:
- Re: Forward Link v.s. Scan them all ? jun-ichi.odagiri
- References:
- Xenomai Linux Dirk Zimoch
- Re: Xenomai Linux Andrew Johnson
- Re: Xenomai Linux Dirk Zimoch
- Forward Link v.s. Scan them all ? jun-ichi.odagiri
- Navigate by Date:
- Prev:
Forward Link v.s. Scan them all ? jun-ichi.odagiri
- Next:
Re: Forward Link v.s. Scan them all ? jun-ichi.odagiri
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Forward Link v.s. Scan them all ? jun-ichi.odagiri
- Next:
Re: Forward Link v.s. Scan them all ? jun-ichi.odagiri
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|