Subject: |
Re: caget command holds for more than 10 seconds |
From: |
Ralph Lange <[email protected]> |
To: |
"'tech-talk'" <[email protected]> |
Date: |
Wed, 01 Jun 2011 11:40:41 +0200 |
On 31.05.2011 17:17 Jeff Hill wrote:
Of course, more optimal performance can be obtained by writing a specialized
ca client that opens N channels, fetches N values, and then closes the N
channels. This will allow the circuit creation/shutdown overhead and process
creation/shutdown overhead to be amortized over the N channels.
This is how the caget command line tool works.
~Ralph
- References:
- caget command holds for more than 10 seconds lailongwei
- Re: caget command holds for more than 10 seconds Ralph Lange
- RE: caget command holds for more than 10 seconds Mark Rivers
- RE: caget command holds for more than 10 seconds Jeff Hill
- Navigate by Date:
- Prev:
Re: Xenomai Linux Dirk Zimoch
- Next:
RE: EPICS on Delta Tau Power PMAC Dalesio, Leo
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: caget command holds for more than 10 seconds Jeff Hill
- Next:
Re: caget command holds for more than 10 seconds Dirk Zimoch
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|