Hi folks,
I wonder if anyone has developed EPICS support for the Delta Tau
UMAC system. This is a 3-U rack-mount system with power supply, drivers,
controllers, and communication board (a turbo PMAC2 board), which
communicates with the host PC via USB or Ethernet (or serial). My
communication/CPU board has a SN # 3X0-603766 and unfortunately, I could not
find the product on the Delta Tau webpage.
A simple search on this list suggests there were enough work done on
the PMAC-VME controller. But I don't see any related to the UMAC system I
have. Anyone has any information? Thanks a lot!
Zhan
---------------------------------
Zhan Zhang, Ph. D.
Argonne National Laboratory
X-ray Science Division, 438-D005
9700 S. Cass Ave.
Argonne, IL 60439
Tel : 630-252-0863
Email: [email protected]
- Replies:
- RE: EPICS support for Delta Tau UMAC system matthew.pearson
- References:
- Handling failures in st.cmd Zelazny, Michael Stanley
- Re: Handling failures in st.cmd Ernest L. Williams Jr.
- Re: Handling failures in st.cmd Benjamin Franksen
- Navigate by Date:
- Prev:
RE: EPICS support for OMRON PLC SYSMAC CJIM CPU12-ETN Ethernet communications? CryoCon RS-232? emma.shepherd
- Next:
RE: EPICS support for Delta Tau UMAC system matthew.pearson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Handling failures in st.cmd Till Straumann
- Next:
RE: EPICS support for Delta Tau UMAC system matthew.pearson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|