Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	Re: How to know type of record at client end [Py-epics v3.1.1 interface ]
From:	Ron Sluiter <[email protected]>
To:	Ritesh Sugandhi <[email protected]>
Cc:	[email protected]
Date:	Mon, 18 Apr 2011 09:26:13 -0500

On 4/18/2011 9:00 AM, Ritesh Sugandhi wrote:

Is there is any way, one can know the type of record, if I know the PV name.

I believe RTYP is what you seek. It is documented here.

Ron

References:: How to know type of record at client end [Py-epics v3.1.1 interface ] Ritesh Sugandhi

Navigate by Date:: Prev: How to know type of record at client end [Py-epics v3.1.1 interface ] Ritesh Sugandhi; Next: Re: How to know type of record at client end [Py-epics v3.1.1 interface ] Dirk Zimoch; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: How to know type of record at client end [Py-epics v3.1.1 interface ] Ritesh Sugandhi; Next: Re: How to know type of record at client end [Py-epics v3.1.1 interface ] Dirk Zimoch; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 <2011> 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024

ANJ, 18 Nov 2013