On 4/1/2011 7:36 AM, Dirk Zimoch wrote:
So before breaking anything: Does anyone see a problem with that?
Driver Power Monitoring (DPM) was never implemented for the
MAXv so there is no problem with breaking existing applications.
I don't recall why I did not implement DPM for the MAXv, but
I second Mark's comments and add that features like DPM
add clutter to device drivers and would be better implemented
at a higher level (which is possible with the new asyn motor device
driver support).
Hope this helps,
Ron
- Replies:
- RE: MAXv question matthew.pearson
- References:
- MAXv question Dirk Zimoch
- Navigate by Date:
- Prev:
RE: MAXv question Mark Rivers
- Next:
Agilent/HP E440B driver Pierrick Hanlet
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: MAXv question Mark Rivers
- Next:
RE: MAXv question matthew.pearson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|