Hi Mark, Eric,
I had a problem with my test setup Friday night when I went to test the
device clear commands via asyn. I tried again this morning and both the
device clear and selected device clear via the asyn record (.UCMD and
.ACMD) worked fine and solved my problem with the Kikusui power supply
not responding.
Thank you for your help.
Rob Emery
UW Medical Center
On 3/26/11 4:57 PM, Eric Norum wrote:
On Mar 26, 2011, at 4:28 PM, Mark Rivers wrote:
Hi Robert,
I don't know much about VXI-11. Does the E5810 handle Universal Device Clear or Selected Device Clear in the same way as a local GPIB controller?
Yes, it should perform both addressed and unaddressed Device Clear operations.
Do you have a GPIB bus analyzer to see what's happening?
- References:
- GPIB DCL Robert Emery
- RE: GPIB DCL Mark Rivers
- Re: GPIB DCL Robert Emery
- RE: GPIB DCL Mark Rivers
- Re: GPIB DCL Eric Norum
- Navigate by Date:
- Prev:
Re: 64-bit Channel Archiver Robert Petkus
- Next:
How to use the "Button" object of EDM 彭少丽
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: GPIB DCL Eric Norum
- Next:
asynPortDriver Question Szalata, Zenon M.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|