I believe Tim Madden from APS is writing PCO drivers, you should definitely communicate with him.
Mark
-----Original Message-----
From: [email protected] on behalf of [email protected]
Sent: Thu 2/24/2011 10:53 AM
To: [email protected]
Subject: Anyone working on PCO camera support?
We are currently developing an areaDetector driver for the PCO 4000
camera ( http://www.pco.de/sensitive-cameras/pco4000/ ). In the future
we also intend the driver to support the PCO Edge camera (
http://www.pco.de/scmos-cameras/pcoedge/ ).
We are curious to know if anyone else out there is actively developing
epics areaDetector drivers for these cameras that we should be
collaborating with?
(So far we are only aware of interest form the Australian Synchrotron.)
Thanks,
Pete Leicester
Diamond Light Source Ltd.
--
This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom
- References:
- Anyone working on PCO camera support? peter.leicester
- Navigate by Date:
- Prev:
problem with VxWorks RTC (seems to be caused by tpmac Delta Tau communications, creates problems with autosave) Jay Steele
- Next:
Re: Asyn record DBD Rolf Keitel
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Anyone working on PCO camera support? peter.leicester
- Next:
Re: Anyone working on PCO camera support? Brands Helge
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
<2011>
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|