EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: RE: USB4000
From: David Beauregard <[email protected]>
To: "Geng, Zheqiao" <[email protected]>, "Szalata, Zenon M." <[email protected]>, "[email protected]" <[email protected]>
Date: Tue, 15 Feb 2011 08:04:27 -0600
Hi Qiao,

I have only used it on linux, but I think that Cygwin would also work if needed.

David

-----Original Message-----
From: Geng, Zheqiao [mailto:[email protected]] 
Sent: February-14-11 5:22 PM
To: David Beauregard; Szalata, Zenon M.; [email protected]
Subject: RE: USB4000

Hi David,

What platform does your driver work on? Does it work on Linux?

Best wishes,
Qiao

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Zheqiao Geng
SLAC National Accelerator Laboratory
2575 Sand Hill Road, Mail Stop 64, Menlo Park, CA 94025-7015, USA
phone:  +1(650)926-4262                               
e-mail: [email protected]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~  


-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of David Beauregard
Sent: Friday, February 11, 2011 9:49 AM
To: Szalata, Zenon M.; [email protected]
Subject: RE: USB4000

Hi Zenon,

 

I have developed epics support for the OceanOptics spectrometers here at the CLS and it is being used by a couple other labs.  So far I have used it with the USB4000 and the QE65000.  I can send you the driver I have put together, but it makes use of the Omnidriver package and you will have to buy that from OceanOptics.  The latest version of this driver that I have uses the Omnidriver 1-5, have you already bought this?

 

David  

 

From: [email protected] [mailto:[email protected]] On Behalf Of Szalata, Zenon M.
Sent: February-10-11 2:13 PM
To: [email protected]
Subject: USB4000

 

Here at SLAC we are using the Ocean Optics USB 4000 Spectrometer device.  Presently we only have their application for controlling it.  The users are rather unhappy with it and are asking for EPICS application.

 

Has anyone developed an EPICS driver for this device?

If so, could it be made available?

 

Thanks in advance,

Zen



Replies:
RE: USB4000 Geng, Zheqiao
References:
USB4000 Szalata, Zenon M.
RE: USB4000 David Beauregard
RE: USB4000 Geng, Zheqiao

Navigate by Date:
Prev: RE : Error vxi11 with Lecroy 760Zi DENIS Jean-françois
Next: EPICS Config for 2 Ethernet Adapters graham.cox
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: USB4000 Geng, Zheqiao
Next: RE: USB4000 Geng, Zheqiao
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 18 Nov 2013 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·