Experimental Physics and
Industrial Control System

"Xu, Huijuan" <[email protected]> · Thu, 13 Jan 2011 13:00:31 -0500

Hello Emma,
Sorry to find out that the single port reboot function only works with
CN 2650. I tested with a CN6650 with no fortune. The Moxa representative
has notified this problem to a local product manager who may be able to
get the support to reset the individual port on the NPort 6650.

Regards,
Huijuan  

-----Original Message-----
From: [email protected] [mailto:[email protected]] 
Sent: Tuesday, January 11, 2011 7:07 AM
To: Xu, Huijuan; [email protected]
Subject: RE: MOXA terminal server

Hi Huijuan,

I spotted this as well, but unfortunately it didn't seem to work - the
serial settings didn't appear to actually change until I rebooted the
whole device.  Have you had success with it?

Thanks,
Emma

> -----Original Message-----
> From: Xu, Huijuan [mailto:[email protected]]
> Sent: 10 January 2011 18:33
> To: Shepherd, Emma (DLSLtd,RAL,DIA); [email protected]
> Subject: RE: MOXA terminal server
> 
> Hello Emma,
> Moxa allows single port restart over the web interface. There's
> 'Restart
> Ports' option under 'Restart'. When you submit the new settings for
the
> serial port you can simply save the settings and just restart the port
> you changed.
> 
> Regards,
> Huijuan
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of
> [email protected]
> Sent: Monday, January 10, 2011 4:22 AM
> To: [email protected]; [email protected]
> Subject: RE: MOXA terminal server
> 
> Hi Eric,
> 
> Thanks a lot for that, it sounds very useful.  I'd be happy to help
> out.
> 
> Cheers,
> Emma
> 
> > -----Original Message-----
> > From: [email protected] [mailto:tech-talk-
> > [email protected]] On Behalf Of Eric Norum
> > Sent: 07 January 2011 16:50
> > To: EPICS Tech Talk
> > Subject: Re: MOXA terminal server
> >
> > On Jan 5, 2011, at 9:37 AM, Eric Norum wrote:
> >
> > > It would be great if someone were to write an ASYN interposed
layer
> > above the IP Port driver to allow settings  of remote serial ports
to
> > be controlled (via RFC 2217 commands) in the same manner as local
> > serial ports (i.e. through an ASYN record or through IOC shell
> > commands).
> > > Anyone interested?
> >
> >
> > I didn't get a lot of volunteers for this, but I did find out that
> > quite a few terminal servers support RFC 2217.   Given that I've
> > started working on an asynOctet interposed layer to support this.
> > I'll be looking for testers sometime next week -- hopefully.   For
> now
> > I don't plan to support any more than just setting rate, # stop
bits,
> #
> > data bits, parity and RTS/CTS flow control.
> >
> > --
> > Eric Norum
> > [email protected]
> >
> 
> 
> --
> This e-mail and any attachments may contain confidential, copyright
and
> or privileged material, and are for the use of the intended addressee
> only. If you are not the intended addressee or an authorised recipient
> of the addressee please notify us of receipt by returning the e-mail
> and
> do not use, copy, retain, distribute or disclose the information in or
> attached to the e-mail.
> Any opinions expressed within this e-mail are those of the individual
> and not necessarily of Diamond Light Source Ltd.
> Diamond Light Source Ltd. cannot guarantee that this e-mail or any
> attachments are free from viruses and we cannot accept liability for
> any
> damage which you may sustain as a result of software viruses which may
> be transmitted in or with the message.
> Diamond Light Source Limited (company no. 4375679). Registered in
> England and Wales with its registered office at Diamond House, Harwell
> Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United
> Kingdom
> 
> 
> 
> 

-- 
This e-mail and any attachments may contain confidential, copyright and
or privileged material, and are for the use of the intended addressee
only. If you are not the intended addressee or an authorised recipient
of the addressee please notify us of receipt by returning the e-mail and
do not use, copy, retain, distribute or disclose the information in or
attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual
and not necessarily of Diamond Light Source Ltd. 
Diamond Light Source Ltd. cannot guarantee that this e-mail or any
attachments are free from viruses and we cannot accept liability for any
damage which you may sustain as a result of software viruses which may
be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in
England and Wales with its registered office at Diamond House, Harwell
Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United
Kingdom

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System