g+
g+ Communities
Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014 
<== Date ==> <== Thread ==>

Subject: Building seq-2.0.11 with base-3.14.12
From: <jun-ichi.odagiri@kek.jp>
To: <tech-talk@aps.anl.gov>
Date: Wed, 12 Jan 2011 14:56:33 +0900
Dear All;

I tried to build seq-2.0.11 with base-3.14.12 on CentOS 5.5 to
find that it fails. (I attatch the log messages below this writing.)
It looks like the problem is something under base/configure though
I'm not sure on this point.

Is there anyone who has succeeded in it? 

Any comments or advice are all welcome.

Thanks a lot in advance.

Jun-ichi Odagiri
High Energy Accelerator Research Organization (KEK)

---------------------------------------------------------------
[root@localhost seq]# make linux-x86
make -C ./configure linux-x86 
make[1]: Entering directory `/opt/epics/modules/soft/seq-2.0.11/
configure'
perl /opt/epics/base/bin/linux-x86/makeMakefile.pl O.linux-x86 ../..
mkdir O.Common
make -C O.linux-x86 -f ../Makefile TOP=../.. T_A=linux-x86
make[2]: Entering directory `/opt/epics/modules/soft/seq-2.0.11/
configure/O.linux-x86'
perl /opt/epics/base/bin/linux-x86/convertRelease.pl checkRelease
make[2]: Leaving directory `/opt/epics/modules/soft/seq-2.0.11/configure
/O.linux-x86'
make[1]: Leaving directory `/opt/epics/modules/soft/seq-2.0.11/configure
'
make -C ./src linux-x86 
make[1]: Entering directory `/opt/epics/modules/soft/seq-2.0.11/src'
make -C ./pv linux-x86 
make[2]: Entering directory `/opt/epics/modules/soft/seq-2.0.11/src/pv'
perl /opt/epics/base/bin/linux-x86/makeMakefile.pl O.linux-x86 ../../..
mkdir O.Common
make -C O.linux-x86 -f ../Makefile TOP=../../.. T_A=linux-x86
make[3]: Entering directory `/opt/epics/modules/soft/seq-2.0.11/src/pv/O.
linux-x86'
Installing generic include file ../../../include/pv.h
mkdir ../../../include
Installing generic include file ../../../include/pvAlarm.h
Installing generic include file ../../../include/pvCa.h

/usr/bin/g++ -c  -D_POSIX_C_SOURCE=199506L -D_POSIX_THREADS -D_XOPEN_
SOURCE=500          -DPVCA  -D_X86_  -DUNIX  -D_BSD_SOURCE -Dlinux  -D_
REENTRANT   -O3   -Wall      -m32     -g -fPIC -MMD -I. -I../O.Common -I.
 -I.. -I../../../include/os/Linux -I../../../include -I/opt/epics/base/
include/os/Linux -I/opt/epics/base/include       ../pvNew.cc 

/usr/bin/g++ -c  -D_POSIX_C_SOURCE=199506L -D_POSIX_THREADS -D_XOPEN_
SOURCE=500          -DPVCA  -D_X86_  -DUNIX  -D_BSD_SOURCE -Dlinux  -D_
REENTRANT   -O3   -Wall      -m32     -g -fPIC -MMD -I. -I../O.Common -I.
 -I.. -I../../../include/os/Linux -I../../../include -I/opt/epics/base/
include/os/Linux -I/opt/epics/base/include       ../pv.cc 

/usr/bin/g++ -c  -D_POSIX_C_SOURCE=199506L -D_POSIX_THREADS -D_XOPEN_
SOURCE=500          -DPVCA  -D_X86_  -DUNIX  -D_BSD_SOURCE -Dlinux  -D_
REENTRANT   -O3   -Wall      -m32     -g -fPIC -MMD -I. -I../O.Common -I.
 -I.. -I../../../include/os/Linux -I../../../include -I/opt/epics/base/
include/os/Linux -I/opt/epics/base/include       ../pvCa.cc 
/usr/bin/ar -rc   libpv.a        pvNew.o pv.o pvCa.o 
/usr/bin/ranlib libpv.a
/usr/bin/g++ -o libpv.so -shared -fPIC -Wl,-hlibpv.so -L/opt/epics/base/
lib/linux-x86 -Wl,-rpath,/opt/epics/base/lib/linux-x86       -m32        
       pvNew.o pv.o pvCa.o    -lca -lCom   -lpthread   -lreadline -
lncurses -lm -lrt -ldl -lgcc
Installing shared library ../../../lib/linux-x86/libpv.so
mkdir ../../../lib
mkdir ../../../lib/linux-x86
Installing library ../../../lib/linux-x86/libpv.a
make[3]: Leaving directory `/opt/epics/modules/soft/seq-2.0.11/src/pv/O.
linux-x86'
make[2]: Leaving directory `/opt/epics/modules/soft/seq-2.0.11/src/pv'
make -C ./seq linux-x86 
make[2]: Entering directory `/opt/epics/modules/soft/seq-2.0.11/src/seq'
perl /opt/epics/base/bin/linux-x86/makeMakefile.pl O.linux-x86 ../../..
mkdir O.Common
make -C O.linux-x86 -f ../Makefile TOP=../../.. T_A=linux-x86
make[3]: Entering directory `/opt/epics/modules/soft/seq-2.0.11/src/seq/
O.linux-x86'
Installing generic include file ../../../include/seqCom.h
make[3]: *** No rule to make target `../../../lib/linux-x86/libiocsh.a', 
needed by `libseq.a'.  Stop.
make[3]: Leaving directory `/opt/epics/modules/soft/seq-2.0.11/src/seq/O.
linux-x86'
make[2]: *** [linux-x86] Error 2
make[2]: Leaving directory `/opt/epics/modules/soft/seq-2.0.11/src/seq'
make[1]: *** [seq.linux-x86] Error 2
make[1]: Leaving directory `/opt/epics/modules/soft/seq-2.0.11/src'
make: *** [src.linux-x86] Error 2
[root@localhost seq]# 
---------------------------------------------------------------------




Replies:
Re: Building seq-2.0.11 with base-3.14.12 Andrew Johnson

Navigate by Date:
Prev: Re: Problem using large arrays with Channel Access in EPICS 3.14.12 Andrew Johnson
Next: Errors in building areaDetector Mi Qingru
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014 
Navigate by Thread:
Prev: Re: large arrays native element count wrong with Channel Access in EPICS 3.14.12 Andrew Johnson
Next: Re: Building seq-2.0.11 with base-3.14.12 Andrew Johnson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  <20112012  2013  2014 
ANJ, 18 Nov 2013 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICSv4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·