-----Original Message-----
From: Dirk Zimoch [mailto:[email protected]]
Sent: 05 January 2011 15:59
To: Shepherd, Emma (DLSLtd,RAL,DIA)
Cc: [email protected]
Subject: Re: MOXA terminal server
Hi Emma,
Does your Moxa run on Linux or Windows? Mine is Linux and I use the
local program /bin/setinterface to select the mode (RS232, RS482 2
wire,
RS422, RS485 4 wire).
When running EPICS on the Moxa, you can do this from the EPICS startup
script with the 'system' command (3.14.12) or from inside StreamDevice
with the 'exec' command.
Dirk
[email protected] wrote:
Hi all,
We have recently been investigating options for controlling serial
devices via a terminal server. We particularly want the ability to
software switch between RS-232/RS-422/RS-485. One that has this
capability and seems to be generally recommended by the EPICS
community
is the MOXA NP6650 32-port device server.
However, after buying one to evaluate, we discovered an annoying
'feature': to change the settings of a serial port over the web
interface (baud rate etc) requires a reboot of the server, which of
course disrupts communications on all ports (and actually crashes my
soft IOC, though this might be a streamDevice issue...).
We wondered if anybody else has also come across this problem? If