Experimental Physics and
Industrial Control System

"Shen, Guobao" <[email protected]> · Fri, 03 Dec 2010 14:30:19 -0500

Try a new version of Visual C++ if possible, Visual Studio
2008/2009/2010 for example.
Guobao
åçä wrote:

Hi Jeff,

I used the version 6 of Visual C++ Compiler.

Zhang Yuliang

------------------------------------------------------------------------

*åääï* Jeff Hill

*åéæéï* 2010-12-02 00:05:44

*æääï* 'åçä'; 'tech-talk'

*æéï*

*äéï* RE: Build EPICS Base3.14.9 on Windows
Hi,

Ã ..\..\..\include\osiWireFormat.h(80) : error C2989: 
Ã 'AlignedWireRef<T>' : template class has 
Ã already been defined as a non-template class

Which version of the Microsoft compiler is in use?

Jeff

______________________________________________________

Jeffrey O. Hill Email [email protected]
<mailto:[email protected]>

LANL MS H820 Voice 505 665 1831

Los Alamos NM 87545 USA FAX 505 665 5107

Message content: TSPA

With sufficient thrust, pigs fly just fine. However, this is
not necessarily a good idea. It is hard to be sure where they
are going to land, and it could be dangerous sitting under them
as they fly overhead. -- RFC 1925

*From:* [email protected]
[mailto:[email protected]] *On Behalf Of *???

*Sent:* Wednesday, December 01, 2010 6:16 AM

*To:* tech-talk

*Subject:* Build EPICS Base3.14.9 on Windows

Hi all,

I got the following error code when I compiled EPICS Release3.14.9
on windows with GnuMake3.8.1 and ActivePerl5.10.

..\..\..\include\osiWireFormat.h(80) : error C2989: 'AlignedWireRef<T>' : template class has 
already been defined as a non-template class
..\..\..\include\osiWireFormat.h(80) : error C2908: explicit specialization; 
'AlignedWireRef<T>' has already been instantiated from the primary template
..\..\..\include\osiWireFormat.h(80) : error C2988: unrecognizable template 
declaration/definition
..\..\..\include\osiWireFormat.h(107) : error C2244: 
'AlignedWireRef<T>::AlignedWireRef<T>::AlignedWireRef<T>' : unable to resolve function 
overload
..\..\..\include\osiWireFormat.h(109) : error C2954: template definitions cannot nest
..\..\..\include\osiWireFormat.h(115) : error C2995: 'operator`'' : template function has 
already been defined
 ..\..\..\include\osiWireFormat.h(63) : see declaration of 'operator`''

2010-12-01
------------------------------------------------------------------------
åçä

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System