Experimental Physics and
Industrial Control System

Eric Norum <[email protected]> · Wed, 17 Nov 2010 08:17:53 -0800

Builds for octave on OS X 10.6.5 and seems to be running fine.
Thanks !

On Nov 17, 2010, at 3:08 AM, Korhonen Timo wrote:

> Dear all,
> 
> the enhancements to mca (Matlab Channel Access) that I announced in the last EPICS meeting are now
> available (except the GUI objects - those are not really part of the mca. They will follow later - if there
> is interest..)
> After consulting with Kay Kasemir we decided to put the code into SourceForge (sorry APS folks,
> I know you have problems with it) epics-applications project:
> https://sourceforge.net/projects/epics/
> 
> The code is in CVS:/extensions/mca
> 
> It has been in use here at PSI for a while (apart from one small change in egu handling) on our
> Scientific Linux 5 machines and I am not aware of any open issues.
> 
> Please take a look at the code and see if it works on other platforms and with Octave.
> Do not hesitate to point out problems - I am not very experienced in matlab interface API
> and my C++ skills also need some brushing up...
> 
> The main changes are listed in the release note (for version 4.2)
> 
> cheers,
> Timo
> 
> -- 
> Timo Korhonen  PSI (Paul Scherrer Institut, http://www.psi.ch)               CH-5232 Villigen PSI               tel + 41- 56 3103262  fax + 41 - 56 310 5090 e-mail:	       [email protected]
> 

-- 
Eric Norum
[email protected]

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System